Description
Details
- Parameters Measured: Ls/ Lp/ Cs/ Cp/ Rs/ R p/ D/ Q/ Θ/ ESR / L C R auto selection
- LCD Display: Dual 19999/ 1999 display & bar graph 51 segment
- Measuring rate: Approx. 2 times per second
- Range： Automatic
- Overload：” OL” Display On LCD
- Low Battery: Display On LCD
- Auto Power Off： In 5 Minutes Approx.
- Battery：9V x1
- Safety standard: IEC 61326-1 & IEC 61326-2-2
Features:
- Auto L/C/R check
- 100 / 120 / 1K / 10K / 100K Hz test frequency
- 20,000 / 2,000 counts display
- Backlight
- Ls/ Lp/ Cs/ Cp/ Rs/ Rp/ DCR with D/Q/θ/ESR measurement
- Relative mode
- Series / Parallel modes
- Components sorting function
*Selectable tolerance ±0.25%、±0.5%、± 1%、±2%、±5%、±10%、±20%、-20%+80% - Low battery indication
- 4-wire Kelvin measurement
Measurement Ranges：
Accuracy: ±(% of reading + number of least significant digits) at 23°C ± 5°C, <75% R.H.
1. Specifications are based on measurement performed at input sockets or terminals with Alligator Test Lead Case (TL-21) after short & open calibration.
2. DUT ( device under test ) & Test leads should be properly shielded to GUARD if necessary.
3. To make better precision measurements on extremely high or low impedance ranges of L,C,R, it is highly recommended that do OPEN/SHORT calibration before measuring for following ranges marked with *
TEMP./Humidity：
- Operation：0°C~ 50°C(32℉~122℉)/<70% R.H.(no condensation)
- Storage：-20°C~ 60°C(-4℉~140℉)/<80%R.H.(no condensation)
Dimension & Weight：
- 188(L)x95(W)x52(H)mm
- Approx.350g (excluding battery)
Accessories：
- TL-21: Alligator test lead case x 1
- AC/DC Adaptor x 1
- TL-23: Green & Yellow Guard Line: cable with an alligator clip x 1
- TL-22 SMD Tweezers x 1
- DC 9V Battery x1
- Instruction Manual x1
- Carry case x 1
